3M SP-7533 Screen printing glue adhesives
3M™ Screen-Printable Adhesive SP7533 is a waterborne emulsion adhesive. Once dried, the adhesive can not be re-emulsified.
Dilution
Use this adhesive directly from the container without dilution
Agitation
There may be some separation in the upper layer of adhesive after long term storage.
Stir well before using
Additives
Avoid adding additives such as defoamers as they may reduce adhesion.
Container
Close lid tightly for storage. Adhesive surface will skin over if left unopened for
several hours. Avoid returning adhesive to container.
Inquiry Basket
