1. Uses: Adhesives for electrical and electronic components
Tin compounds are limited use
Polycarbonate, ABS resin and other hard plastic materials and metal materials bonding.
Requires initial adhesive strength bonding.
Thermal expansion coefficient between the different hard material bonding.
Susceptible to impact and vibration of the part of the adhesion.
2. specialty
Conforms to the REACH Regulation of the Committee Regulation (EU) No. 276/2010 on Appendix XVII.
Liquid at room temperature curing elastic adhesive
Not used RoHS specified six substances (cadmium, lead, mercury, hexavalent chromium and its compounds, polybrominated biphenyls, polybrominated diphenyl ethers).
Low-molecular-weight cyclic polysiloxanes that may cause contact barriers are not used.
Ultra fast curing
3. Use method
Before using the adhesive tube, first peel off the aluminum heat shield on the port.
When installing the cartridge, first use the tip of the screwdriver to cut the aluminum wet film on the port, then install the nozzle, and then cut the tip and install it on the glue gun.
Please remove dirt, rust, oil and other dirt and coating on the bonding surface, and then allow it to dry thoroughly after cleaning with solvent.
If the area of the adhesive is large, first use a knife and other tools to expand the adhesive thinly, and then the two sides together.
4. Packaging capacity
120ml pipe into the number: 20 root (5 × 4)
333ml rubber tube into the number: 20 root (10 × 2)
Inquiry Basket
